2, Jalan Utama 1/10,
Taman Perindustrian Puchong Utama,
47100 Puchong,
Selangor, Malaysia.
+603-8063 2889
+603-8061 0889
Tecoline Sdn Bhd
2, Jalan Utama 1/10,
Taman Perindustrian Puchong Utama,
47100 Puchong,
Selangor, Malaysia.
2, Jalan Utama 1/10,
Taman Perindustrian Puchong Utama,
47100 Puchong,
Selangor, Malaysia.
Nylon Tubing
| Previous | 5 / 6 | Next |
-Nylon Tube has high mechanical properties, extremely high pressure rating and a wide temperature range. The loss of mechanical strength at elevated temperatures is much less than with other types of plastic tube.It retains its flexibility at sub-zero temperatures.
Note :The working pressured listed for the nylon tubing is rated at +70°F. Any ambient or internal increase in temperature will lower the above listed working pressures.
Color : Black, Blue, White
Application :
-Nylon tube us odorless, tasteless, non-toxic, fungus and corrosion resistant, readily sterilized in steam or boiling water. Thus, fatigue resistance to bending is very great.
-This Tube has excellent chemical resistant being unaffected by gasoline, oils,greases and organic solvents.Lighter than metal, nylon tube makes for ease in handling and installing. Used with nylon fittings, it provides a completely corrosion resistant tubing system. This tube is not recommended for the use with strong mineral acids,strong oxidizing agents such as hydrogen peroxide, bleach solutions, phenol and creoles.
Note :The working pressured listed for the nylon tubing is rated at +70°F. Any ambient or internal increase in temperature will lower the above listed working pressures.
Color : Black, Blue, White
Application :
∙ Piping in pneumatic
∙ Central lubrication systems
∙ Air conditioners
∙ Painting machines
∙ Piping in ship (air pressure control, oil or water gauge piping)
∙ Air Piping in automatic control panels
∙ Automobiles (Car air conditioner grease piping)
∙ Agricultural chemical spray machines
∙ Chemical plant (automatic control, instrumentation signal.)
| Stock Code | Sizes | Std Lgth(M) | ID(mm) | OD(mm) | W/P (psi) | ||||||||||||||||||||
| PN-4 | 4MM | 100 | 2 | 4 | 250 | ||||||||||||||||||||
| PN-6 | 6MM | 100 | 4 | 6 | 250 | ||||||||||||||||||||
| PN-8 | 8MM | 100 | 6 | 8 | 250 | ||||||||||||||||||||
| PN-10 | 10MM | 100 | 7.5 | 10 | 250 | ||||||||||||||||||||
| PN-12 | 12MM | 100 | 9 | 12 | 250 | ||||||||||||||||||||
| PN-1/8 | 1/8″ | 100 | 0.093 | 1/8″ | 250 | ||||||||||||||||||||
| PN-1/4 | 1/4″ | 100 | 0.179 | 1/4″ | 250 | ||||||||||||||||||||
| PN-5/16 | 5/16″ | 100 | 0.236 | 5/16″ | 250 | ||||||||||||||||||||
| PN-3/8 | 3/8″ | 100 | 0.275 | 3/8″ | 250 | ||||||||||||||||||||
| PN-1/2 | 1/2″ | 100 | 0.380 | 1/2″ | 250 | ||||||||||||||||||||